Coarse grained cork sheets can be a great mean for thermal and sound insulation. A coarse cork panel has a higher density in comparison with medium grained or fine grained cork sheets. Fixed on the wall or ceiling is an acoustic isolation and eliminates all the sounds coming from the other side. If the wall is thin and the noise is of great inconvenience, it is worth to consider a light construction of 15-20mm cork insulation panel, air gap or mineral wool and closing plasterboard or OSB panel. In the majority of cases the placement of the 10mm wall cork insulation panel will be sufficient for reducing the noise.
Looking for a bit of privacy?
If the issue at hand is more serious than just a loud TV then a coarse grained cork insulation panel is an answer to the problem. A panel 5 to 7mm thick will be enough to achieve privacy in one’s own home. It is worth not finishing the cork panel after the fixture as its irregular structure will disperse sounds more effectively and eliminate any echoes, increasing our comfort. As the technical cork may not be appealing to everyone, we offer a wide range of decorative cork.
Freezing outside and the walls are ice cold?
40 million cells full of air in every cubic centimetre gives thermal conductivity of 0.037 W/mK. What does this means? It means no more high gas bills and much more warmth in the apartment. Just 3-5mm coarse cork insulation panel is enough to make even the coldest walls warm to the touch. But the 7-10mm cork insulation sheets will provide enough insulation and will keep the warm air inside to turn it into a comfortable and cosy living space.
Cork sheets are a fine material that can be fixed in a variety of ways. The cheapest and the easiest method to fix them is by gluing them with cork glue. We recommend Wakol D-3540 that can be found in our ‘Cork Glues’ section. Our advice is to use around 120 grams of glue per sheet, which means that 0.8kg of glue is enough for 6 sheets, and a bucket of 2.5kg - 20 sheets. Of course using cork glue is not obligatory. The most widely used fixing glues and strong wood binders. It is best to choose a product with good initial tack, as it will make the job easier and faster, especially for the less experienced.
Those that are not traditional glue enthusiasts will surely be interested in our self adhesive cork tiles that can be found in the category nearby. Fixture of the self adhesive cork tiles is fast, clean and simple. After taking off the protective foil just glue the panel on prepared selected surface. With the help of good double-sided tape it is possible to create self adhesive cork wall tiles at home – what is left is to order a good medium grained cork sheet.
Needing some finishing?
Cork board tiles can be left alone without any finish. They can also be finished in any way possible. Cork wall tiles can be painted over with any paint, lacquer or wood stain to enhance or cover up the cork’s structure. If the cork board tiles will be exposed to dirt and will be washed frequently, it is worth finishing it with a protective product. The cheapest and least labour intensive way to finish it is... leaving the cork wall tiles unfinished! The original structure will bring a new and natural dimension to the interior and furthermore such a cork wall can be a perfect cork pin board for the whole family!
Our cork wall panels have a variety of applications limited only by imagination and creativity. We offer a wide range of cork products to meet different requirements of our clientele. We invite you to spend a little time to get to know our cork products better!
Did you know that by choosing our products you are helping the environment?
Natural cork is produced with care for low energy usages, practically nonexistent emission and minimum environmental impact. Choosing 100% natural cork products, you are contributing to the development of responsible, innovative and sustainable solutions, help protect our environment and future generations. Enjoy the shopping!
Customers who bought this product also bought